Dan 07930 686788Dean 07714 082269

Standard working hours · emergency call-outs where possible

AboutServices
- Boiler InstallationNew and replacement boilers, installed by Vaillant Advance Installers.
- Air Conditioning InstallationDomestic split and multi-split systems, F-Gas registered.
- Full Central Heating InstallationComplete heating systems designed around your home.
- Boiler ServicingAnnual servicing to keep your boiler safe and efficient.
- Air Conditioning ServicingKeep domestic AC running efficiently, year after year.
- PlumbingEveryday domestic plumbing, done properly and left tidy.
- Boiler RepairFast, honest repairs when your boiler stops working.
- Power FlushingClear sludge from your heating system so radiators heat evenly.
- Radiator & Heated Towel Rail InstallationNew radiators, designer rads and heated towel rails, fitted neatly.
- Bathroom InstallationFull bathroom installations, from strip-out to finished room.
- Shower InstallationNew showers and shower rooms, plumbed and sealed properly.
- Hot Water Cylinders & Water MainsUnvented cylinder installs and water main upgrades for better pressure.Free estimate

Every job starts with a free survey and a written price. No call-out fee.

Book a free surveyView all 12 services

AreasTowns we cover

- Maidstone
- Aylesford
- Larkfield
- Rochester
- Snodland
- West Malling
- Kings Hill
- Sevenoaks
- Chatham
- Gillingham
- Strood
- Gravesend
- Sittingbourne
- Tonbridge
- Bearsted
- Faversham
- Ashford
- Tunbridge Wells
- Dartford
- Canterbury
- Benfleet
- Canvey Island
- Hadleigh
- Thundersley
- Rayleigh
- Leigh-on-Sea
- Southend-on-Sea
- BasildonSee every area we cover

Our WorkReviewsContactDan07930 686788Dean07714 082269

Free Estimate

Menu

- Home
- Services
- Power FlushingService

# Power Flushing for Central Heating Systems in Maidstone and Medway
Sludge cleared out of your radiators and pipework so the heat you pay for reaches the rooms you use, and your boiler stops working against a system full of debris.

Call Dan · 07930 686788Call Dean · 07714 082269Free estimate

9.97/10 from 13 Checkatrade reviews·Free survey, no call-out fee·1-year workmanship guarantee

Gas Safe registered

Company reg. no. 552490, all engineers registered

Vaillant Advance Installer

Dan and Dean

F-Gas registered company

FGAS ID FGAS3023734

Checkatrade member

Independently vetted

Constructionline Gold

Accredited supplier

Fully insured

£5m public · £10m employers' liability

## What power flushing involves
Power flushing circulates water and cleaning chemicals through your heating system at high velocity to lift out the black iron-oxide sludge, scale and debris that build up in radiators and pipework over the years. The system is then refilled with clean water and a corrosion inhibitor to keep it that way.

The tell-tale signs are familiar: radiators cold at the bottom but warm at the top, some rooms never getting warm, a boiler that bangs or kettles, or a pump and radiator valves that keep failing. All of them are symptoms of dirty system water rather than a faulty appliance.

We also flush as part of a boiler installation. Fitting a new boiler onto an old, sludged system feeds the debris that killed the last heat exchanger straight into the new one, which is why cleaning the system first is a condition of most manufacturer warranties.

- Fixes cold spots and slow-to-warm radiators
- Protects a new or existing boiler
- Inhibitor added to keep the system clean
- Free estimate before we start

Why it matters

## What sludge is costing you

Sludge is corrosion. Every gram of it in the bottom of a radiator is metal that used to be part of your system, and it keeps forming as long as oxygenated water keeps circulating.

It blocks the bottom of radiators first, which is why they go cold from the base up, then it restricts pipework and finally the boiler's heat exchanger: the single most expensive component in the system.

In the meantime you pay to heat water that never reaches the rooms you sit in, and the pump works harder and fails sooner than it should.

### Common mistakes we're called in to fix

- Bleeding radiators over and over when the cold area is at the bottom, not the top
- Fitting a new boiler onto an uncleaned system and voiding the warranty
- Topping up a system that keeps losing pressure instead of finding the leak
- Refilling after a drain-down without adding a corrosion inhibitor

Our process

## Our power flushing process

- 1
### Free survey
We check radiator temperatures across the house and look at the boiler and system to confirm a flush is genuinely the answer.

- 2
### Written estimate
The price is agreed in writing before we start, based on the size of the system rather than a guess.

- 3
### Flush
The pumping unit is connected and the system is flushed radiator by radiator with cleaning chemicals to lift the sludge out.

- 4
### Refill and protect
The system is refilled with clean water and a corrosion inhibitor to slow the build-up returning.

- 5
### Balance and test
Radiators are balanced and re-checked so heat is distributed evenly, then the site is left clean.

Benefits

## What you get from a clean heating system

### Radiators hot all over
No more cold bottoms and cold rooms while the boiler runs flat out.

### Lower running cost
Heat you have paid for reaches the rooms instead of being lost to a blocked system.

### Boiler protection
Debris kept out of the heat exchanger, which is the expensive part to replace.

### Quieter heating
Banging and kettling usually settle once the debris causing them is gone.

### Warranty compliance
Cleaning the system is what most manufacturers require alongside a new boiler.

### 1-year workmanship guarantee
Backed like every other job we carry out.

In detail

## Power flushing in more detail
What a flush can and cannot fix, and when it is worth doing.

### How to tell if you need one
Feel your radiators once the heating has been on for twenty minutes. Warm at the top and cold across the bottom is classic sludge. Cold at the top with a warm bottom is usually trapped air and just needs bleeding.

Other pointers are dirty black water when you bleed a radiator, repeated pump or valve failures, and a boiler that makes a kettling noise as it fires.

### Flushing alongside a new boiler
If you are replacing a boiler on an existing system, cleaning that system is not an upsell: it is what keeps the new appliance and its warranty intact.

We include the system preparation as part of our boiler installation work, and we will tell you at survey stage whether a full power flush or a chemical clean is what your system actually needs.

### Keeping it clean afterwards
Corrosion inhibitor is what stops the sludge re-forming, and it depletes over time, particularly on systems that have been drained or topped up.

An annual boiler service is the natural point to check inhibitor levels and radiator performance so the system stays as clean as the day it was flushed.

### Related services

- Boiler Installation
- Air Conditioning Installation
- Full Central Heating Installation
- Boiler Servicing
- Air Conditioning Servicing
- Plumbing
- Boiler Repair
- Radiator & Heated Towel Rail Installation
- Bathroom Installation
- Shower Installation
- Hot Water Cylinders & Water Mains

### Popular areas we cover

- Power Flushing in Maidstone
- Power Flushing in Aylesford
- Power Flushing in Larkfield
- Power Flushing in Rochester
- Power Flushing in Snodland
- Power Flushing in West MallingSee all areas we cover, browse every service, go back to the homepage, or contact us.

Where we work

## Power Flushing across Maidstone and Medway

- Maidstone
- Aylesford
- Larkfield
- Rochester
- Snodland
- West Malling
- Kings Hill
- Sevenoaks
- Chatham
- Gillingham
- Strood
- Gravesend
- Sittingbourne
- Tonbridge
- Bearsted
- Faversham
- Ashford
- Tunbridge Wells
- Dartford
- Canterbury
- Benfleet
- Canvey Island
- Hadleigh
- Thundersley
- Rayleigh
- Leigh-on-Sea
- Southend-on-Sea
- Basildon

What customers say

## Rated 9.97 out of 10across 13 Checkatrade reviews

Leave a review

10/10 · New Air Conditioning Installed

"From my first enquiry to completion of works I found them to be very courteous, hard working and competitively priced. Dan carried out a full survey and gave a cost breakdown for works. A date was booked and the guys turned up on time and work was completed within the given timescale. They were very polite and tidy and even vacuumed after completion. I am so happy with my new hot/cold air conditioning unit which will enable me to work comfortably from home and sleep at night. They even sorted my dripping tap free of charge! I would highly recommend DM Heating and Cooling."Verified Checkatrade review, ME310/10 · New Combi Boiler Installation

"I had a new combi boiler installed and had my old one removed. Excellent service and a very productive team. They were helpful with boiler and thermostat advice and quick to reply. I would highly recommend their services."Verified Checkatrade review, ME2010/10 · Boiler replacement

"Dean and the team were excellent. Quick response to initial issue, boiler needed replacing. All quotes explained with options. Work carried out quickly and professionally. I found them to be very reliable and trustworthy. Wouldn't hesitate to use again or recommend."Verified Checkatrade review, DA2

Common questions

## Straight answers,before you call
Still unsure? Call Dan on 07930 686788 or Dean on 07714 082269.

How long does a power flush take?Most domestic systems are done in a day. Larger properties with more radiators can take longer, and we will tell you which at the free survey.

Will a flush fix a cold radiator?If the radiator is cold at the bottom, usually yes. If it is cold at the top it is trapped air, and if it is cold all over it may be a valve, we check before recommending anything.

Do I need a flush with a new boiler?The system needs cleaning before a new boiler goes on. Whether that is a full power flush or a chemical clean depends on the state of the system water.

Is there a call-out fee?No. Surveys and estimates are free, and you get the price in writing before we start.

Do you add inhibitor afterwards?Yes. The system is refilled with clean water and a corrosion inhibitor to slow the sludge coming back.

## Cold radiators? Get the system cleaned properly
Free survey, a written price and a heating system that puts the heat back where you want it.

Call Dan · 07930 686788Call Dean · 07714 082269Request estimate

Family-run plumbing, heating and domestic air conditioning. Gas Safe registered company no. 552490. F-Gas registered, FGAS ID FGAS3023734.

## Services

- Boiler Installation
- Air Conditioning Installation
- Full Central Heating Installation
- Boiler Servicing
- Air Conditioning Servicing
- Plumbing
- Boiler Repair
- Power Flushing
- Radiator & Heated Towel Rail Installation
- Bathroom Installation
- Shower Installation
- Hot Water Cylinders & Water Mains

## Areas we cover

- Maidstone
- Aylesford
- Larkfield
- Rochester
- Snodland
- West Malling
- Kings Hill
- Sevenoaks
- Chatham
- Gillingham
- Strood
- GravesendAll areas

## Contact

- Dan, 07930 686788
- Dean, 07714 082269
- info@dmplumbingltd.co.uk
- 67 Marlowe RoadAylesford, Larkfield, KentME20 6TW
- Standard working hours, with emergency call-outs available where possibleCheckatradeLeave a review

© 2026 DM Heating and Cooling. Fully insured: £5m public liability, £10m employers' liability.

Privacy PolicyCookie PolicyTerms & Conditions

Call DanFree Estimate

We use essential cookies to run this website, plus optional ones that help us see how it is used. You can accept or decline the optional ones. See our cookie policy.

AcceptDecline